There are gaps in the printed model layers

umitakin

Is there a problem with my printer z-axis or slicing software? How are the default settings for the slicing software for Kossel mini?

I think the filament flows very little between the first and last layers.

Repetier

There are no default settings it all depends on what you have, which nozzle size etc. Assuming printer is calibrated you may have to modufy flow multiplier for filament to extruder more if lines come out too thin, that is all.

umitakin

Flow multiplier for filament ? Is it from memory or software?

Extruder step :357

Filament flow rate from extruder is normal.

Filament release rate is% 106

umitakin

Our questions seem very absurd to you. But I try to understand. Thank you for your interest.

Repetier

In slic3r it is in filament settings. You can also use flow multipler in host/server to test how it looks if flow is increased. Increasing it pushes mor efilament so it gets broader closing gaps.

You might also want to reduce extrusion width in slic3r settings. I have for my 0.5mm nozzle set extrusion with explicitly to 0.5 so it does not broaden by slic3r choice. But that means longe rprint times so personal liking.

umitakin

https://drive.google.com/file/d/0B6Stm3Sp3RWdTXNoZFBCMFBmaEE/view?usp=sharing<div>

Https://drive.google.com/file/d/0B6Stm3Sp3RWdOWRlSjJYS0V5Mkk/view?usp=sharing </div><div>

Https://drive.google.com/file/d/0B6Stm3Sp3RWddThwN1NsWWtkQmM/view?usp=sharing </div><div>

Benim örnek çıktıım yazıcıdan çıktı.

I have to increase the number of layers of the base coat while printing a large pattern on the printer tray. I set all of the axes to a distance of 0.5 to 0.3. I think this is normal.

</div>

umitakin

My 3d Printer:https://drive.google.com/file/d/0B6Stm3Sp3RWdd18taXpSSG5OSFE/view?usp=sharing

Repetier

"increase the number of layers of the base coat" is nothing I can understand.

First layer is 0.3 for my delta, all following layers 0.2-0.1mm depending on quality I want. This is with 0.4mm nozzle.