Hi<br style="clear: both; font-family: Arial; font-size: medium;"><br style="clear: both; font-family: Arial; font-size: medium;">Looking for some help.<br style="clear: both; font-family: Arial; font-size: medium;"><br style="clear: both; font-family: Arial; font-size: medium;">I have an HE3D, having got the correct firmware loaded and everything moving in the correct direction, when I go to Print and the Auto level start to do it thing the Z-Probe hangs over the bed on the righthand side see video link<br style="clear: both; font-family: Arial; font-size: medium;"><br style="clear: both; font-family: Arial; font-size: medium;"><p class="MsoNormal" style="line-height: 200%;">https://youtu.be/d3VC0EVgGpE<o:p></o:p></p><br style="clear: both; font-family: Arial; font-size: medium;">I have tried editing the below setting mainly changing the X2 and X3 setting from 180 to 100 / 150 and re uploading the firmware then comiting the setting to the rom but it does not change anything still over hangs the bed on the second point measure.<br style="clear: both; font-family: Arial; font-size: medium;"><br style="clear: both; font-family: Arial; font-size: medium;">#define Z_PROBE_X1 0<br style="clear: both; font-family: Arial; font-size: medium;">#define Z_PROBE_Y1 0<br style="clear: both; font-family: Arial; font-size: medium;">#define Z_PROBE_X2 180<br style="clear: both; font-family: Arial; font-size: medium;">#define Z_PROBE_Y2 0<br style="clear: both; font-family: Arial; font-size: medium;">#define Z_PROBE_X3 100<br style="clear: both; font-family: Arial; font-size: medium;">#define Z_PROBE_Y3 180<br style="clear: both; font-family: Arial; font-size: medium;"><br style="clear: both; font-family: Arial; font-size: medium;">any help greatly received.<br style="clear: both; font-family: Arial; font-size: medium;"><br style="clear: both; font-family: Arial; font-size: medium;">thanks
