Multiple compile errors

stefanb

Hello

Im trying to compile my newly downloaded firmware but get a lot of errors so it can not complie. Any ideas what to do?

Arduino:1.8.1 (Mac OS X), Kort:"Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

In file included from sketch/HAL.h:83:0,

from sketch/Repetier.h:539,

from sketch/HAL.cpp:1:

sketch/HAL.cpp: In function 'void __vector_22()':

fastio.h:29: error: 'DIOORIG_FAN2_PIN_WPORT' was not declared in this scope

#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## PIN); }; } while (0)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

#define WRITE(IO, v) WRITE(IO, v)

 ^

sketch/HAL.cpp:847:91: note: in expansion of macro 'WRITE'

 if((pwm_pos_set[PWM_BOARD_FAN] = (pwm_pos[PWM_BOARD_FAN] & COOLER_PWM_MASK)) > 0) WRITE(FAN_BOARD_PIN,1);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_PIN' was not declared in this scope

#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## PIN); }; } while (0)

 ^

sketch/fastio.h:17:30: note: in definition of macro 'MASK'

 #define MASK(PIN) (1 << PIN)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

#define WRITE(IO, v) WRITE(IO, v)

 ^

sketch/HAL.cpp:847:91: note: in expansion of macro 'WRITE'

 if((pwm_pos_set[PWM_BOARD_FAN] = (pwm_pos[PWM_BOARD_FAN] & COOLER_PWM_MASK)) > 0) WRITE(FAN_BOARD_PIN,1);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_WPORT' was not declared in this scope

#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## PIN); }; } while (0)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

#define WRITE(IO, v) WRITE(IO, v)

 ^

sketch/HAL.cpp:847:91: note: in expansion of macro 'WRITE'

 if((pwm_pos_set[PWM_BOARD_FAN] = (pwm_pos[PWM_BOARD_FAN] & COOLER_PWM_MASK)) > 0) WRITE(FAN_BOARD_PIN,1);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_PIN' was not declared in this scope

#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## PIN); }; } while (0)

 ^

sketch/fastio.h:17:30: note: in definition of macro 'MASK'

 #define MASK(PIN) (1 << PIN)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

#define WRITE(IO, v) WRITE(IO, v)

 ^

sketch/HAL.cpp:847:91: note: in expansion of macro 'WRITE'

 if((pwm_pos_set[PWM_BOARD_FAN] = (pwm_pos[PWM_BOARD_FAN] & COOLER_PWM_MASK)) > 0) WRITE(FAN_BOARD_PIN,1);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_WPORT' was not declared in this scope

#define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## PIN); }; } while (0)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

#define WRITE(IO, v) WRITE(IO, v)

 ^

sketch/HAL.cpp:947:108: note: in expansion of macro 'WRITE'

 if(pwm_pos_set[PWM_BOARD_FAN] == pwm_count_cooler && pwm_pos_set[NUM_EXTRUDER + 1] != COOLER_PWM_MASK) WRITE(FAN_BOARD_PIN,0);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_PIN' was not declared in this scope

 #define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## _PIN); }; } while (0)

 ^

sketch/fastio.h:17:30: note: in definition of macro 'MASK'

 #define MASK(PIN) (1 << PIN)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

 #define WRITE(IO, v) _WRITE(IO, v)

 ^

sketch/HAL.cpp:947:108: note: in expansion of macro 'WRITE'

 if(pwm_pos_set[PWM_BOARD_FAN] == pwm_count_cooler && pwm_pos_set[NUM_EXTRUDER + 1] != COOLER_PWM_MASK) WRITE(FAN_BOARD_PIN,0);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_WPORT' was not declared in this scope

 #define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## _PIN); }; } while (0)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

 #define WRITE(IO, v) _WRITE(IO, v)

 ^

sketch/HAL.cpp:947:108: note: in expansion of macro 'WRITE'

 if(pwm_pos_set[PWM_BOARD_FAN] == pwm_count_cooler && pwm_pos_set[NUM_EXTRUDER + 1] != COOLER_PWM_MASK) WRITE(FAN_BOARD_PIN,0);

 ^

fastio.h:29: error: 'DIOORIG_FAN2_PIN_PIN' was not declared in this scope

 #define _WRITE(IO, v) do { if (v) {DIO ## IO ## _WPORT |= MASK(DIO ## IO ## _PIN); } else {DIO ## IO ## _WPORT &= _MASK(DIO ## IO ## _PIN); }; } while (0)

 ^

sketch/fastio.h:17:30: note: in definition of macro 'MASK'

 #define MASK(PIN) (1 << PIN)

 ^

sketch/fastio.h:48:25: note: in expansion of macro '_WRITE'

 #define WRITE(IO, v) _WRITE(IO, v)

 ^

sketch/HAL.cpp:947:108: note: in expansion of macro 'WRITE'

 if(pwm_pos_set[PWM_BOARD_FAN] == pwm_count_cooler && pwm_pos_set[NUM_EXTRUDER + 1] != COOLER_PWM_MASK) WRITE(FAN_BOARD_PIN,0);

 ^

Multiple libraries were found for "SPI.h"

 Anv??nd: /Applications/Arduino.app/Contents/Java/hardware/arduino/avr/libraries/SPI

Oanv??nd: /Users/stefan/Documents/Arduino/libraries/rfid_buzzer

exit status 1

'DIOORIG_FAN2_PIN_WPORT' was not declared in this scope

RAyWB

seems you have not defined pin numbers for all fans ( look at config.h)

Repetier

You are ung fan2 but your board definition does not have a default pin for that, so you need to explicitly say the pin number.

stefanb

Great! Thank you very much for the quick response. Now it compiles with out an error so I'll test it in the printer tomorrow.