Hictop

dmkmedia

I uploaded the Repetier firmware to a hictop prusa i3 and the z-axis settings in the old firmware from marlin was

#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80,398,94.4962144}

398 being the Z axis now everything else seems to work on on the firmware once uploaded apart from, the Z axis when i try to move in any direction it just very slowly pulses and turns very very slowly

I have tried ZAXIS_STEPS_PER_MM set at 80, 398, and 2559 but nothing on any values apart from different kinds of slow pulse turning

can anyone help me to find a value, please

my origonal firmware was https://cdn.shopify.com/s/files/1/1671/6015/files/Marlin_3DP17_398.rar?6195037615555381895</div><div style="font-family: Arial, Verdana; font-size: 10pt; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: normal;">

Repetier

Maybe the typical trap for marlin users, that these values are different in eeprom from a first upload? Pleae check using eeprom editor in host/server what values are really used here.