Need some help.

Sheldouille

Hi,

can someone explaine me how to use this:

#define FEATURE_AXISCOMP 1<br style="font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12.48px; background-color: rgb(231, 234, 239);">#define AXISCOMP_TANXY 0<br style="font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12.48px; background-color: rgb(231, 234, 239);">#define AXISCOMP_TANYZ 0<br style="font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 12.48px; background-color: rgb(231, 234, 239);">#define AXISCOMP_TANXZ 0

RAyWB

as written in Configuration.h:/* If your printer is not exactly square but is more like a parallelogram, you can
use this to compensate the effect of printing squares like parallelograms. Set the
parameter to then tangens of the deviation from 90° when you print a square object.
E.g. if you angle is 91° enter tan(1) = 0.017. If error doubles you have the wrong sign.
Always hard to say since the other angle is 89° in this case!
*/
So in my machine angle in direction X-Y is 89.5° so i have a difference of 0.5° tan(0.5) = 0.0087that´s the value i use for correction XYso in Configuration.h the part Looks :#define FEATURE_AXISCOMP 1
#define AXISCOMP_TANXY 0.0087 //0.5 degrees
#define AXISCOMP_TANYZ 0
#define AXISCOMP_TANXZ 0

Sheldouille

ok thank you