printerfanatic I have a k200 delta and i connected it to repetier everything seemed great. So i start calibrating. I put a M119 code and it said the probe status is L So i pushed the probe and the status turned to W. They since that was correct i put in the G29 command and instantly it said the command failed due to a fatal error and will be fixed. I click ok and then nothing happens. No matter how many time i tried the G29 command didn't work. What should i do?
Repetier That is a firmware problem not host as it looks. And from your description I assumeyou are using Marlin? As repetier uses G32 for autoleveling.
printerfanatic Um i am totally new to 3d printing so i don't know what Marlin is. I just bought a k200 delta and in the tutorial video it said g29. Ill give g32 a go though thank you!
Repetier Send M115 and see the output in host log. It will show what firmware you are using. Marlin is a popular firmware alternative to Repetier-Firmware but both have some differences in gcode commands so it is important to know what you have to select the right commands.
printerfanatic my firmware is 0.92.9 repetier. And i found something. whenever i manually on the printer turn auto level on it turns it self off right away.
Repetier Please upgrade to dev version, which has fixed many autoleveling issues and use G32 S2 for leveling. Hope that fixes your problems,
