Install on linux mint 18 - I leave nothing.

lipki

Until it works.

Here is the first error.

$ sh configureFirst.sh System: x86_64 Using 64 bit CuraEngine Lecture des listes de paquets... Fait Construction de l'arbre des dépendances Lecture des informations d'état... Fait Aucune version du paquet libmono-winforms2.0-cil n'est disponible, mais il existe dans la base de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète ou qu'il n'est disponible que sur une autre source Cependant les paquets suivants le remplacent : mono-reference-assemblies-2.0 mono-devel E: Le paquet « libmono-winforms2.0-cil » n'a pas de version susceptible d'être installée rm: impossible de supprimer '/usr/bin/repetierHost': Aucun fichier ou dossier de ce type ln: la cible '/usr/bin/repetierHost' n'est pas un répertoire Checking if you are in the dialout group. 1 User already in dialout group. Adding not required. Compiling helper software to allow non ansi baud rates for some boards depending on the used serial driver. configureFirst.sh: 52: configureFirst.sh: g++: not found Configuration finished. IMPORTANT: In addition to the bundled CuraEngine, the host also supports Slic3r and Skeinforge. These slicers are not bundled, so need to install them according to their docs and then set the path to them in Repetier-Host. For Slic3r simply unpack the tar you get on http://slic3r.org in this directory. The host will then register and add it automatically on next restart. IMPORTANT: You need a recent mono version since the host uses .NET 4.0 If you see the following error message, your mono is too old! >>> System.Windows.Forms.SplitContainer doesn't implement interface System.ComponentModel.ISupportInitialize <<< /home/kevin/Téléchargements/RepetierHost: /home/kevin/Téléchargements/RepetierHost : ceci est un répertoire $ mono -V Mono JIT compiler version 4.2.1 (Debian 4.2.1.102+dfsg2-7ubuntu4) Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com TLS: __thread SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none Misc: softdebug LLVM: supported, not enabled. GC: sgen

Repetier

Looks like they have renamed libmono-winforms2.0-cil but I do not underdstand if they take the replacement or not. I speak no french. Anyhow I see mono was installed. You shoudl also install

sudo apt-get install build-essential

which should contain g++ or at least did it in past. Then compiling SetBaudrate would succeed. Maybe install g++ seperately.

Apart from this what is the error when starting the host?

Dr_Ew

Salut Lipki,
Je n' parlez Francais mais....

I had a similar looking problem in Mint 18 today and Repetier-host would not start after install.

I had previous installed mono using Software manager. This seems to be a problem.

My solution was to use Synaptic Package manager to install "mono-compete." and to install "build-essential" as recommended above.

Repetier now starts.

(note I had also installed "mono-reference-assembliers-4.0" before, I don't know if it has any effect here, but if above doesn't work that might be worth a shot.)

dustycat

Hi Dr_Ew , Repetier
D'not work.
<blockquote class="Quote">

Apart from this what is the error when starting the host?

The shell is started, the printer port is present in the settings, but the printer does not see, the connection to the printer is not set.
g++ installed

Repetier

Is the calling user member of dialout group? That is required to be able to connect to serial port.