Printer Resets after ~1hour printing

moelski

Hi !

My Printer (SparkCube XL) makes often a complete reset after _1hour of printing.

I first thought it could be a Problem with the buffer (since I have this stopping issue while printing).

But I set it back to 64.

My Setup is RADDS 1.5 with RAD128 Drivers and raspberry pi 2 as Server.

Any idea what could cause this reboots?

Several prints get lost because of this issue :-(

Dominik

moelski

Hier are some additional information:

> 7:14:39.403: start
> 7:14:39.404: Info:Watchdog Reset
> 7:14:39.404: Transformation matrix: 1.000000 0.000000 0.000000 0.000000
> 1.000000 0.000000 0.000000 0.000000 1.000000
< 7:14:39.405: N1 M117 ETE 03:34:31

There is a Watchdog reset. But I have no idea why.

Repetier

You should enable logging with such problems and then see what exactly happens. Then you see the commands at that time and answer behaviour. You need a 4s pause without watchdog ping to get this, so what were you doing at that moment. Find it out and try to reproduce it.