Hi,
this is my startup-gcode:
G28
G1 X150 Y150
G1 Z50 F150
After booting, homing and parking works like expected. But the xyz positions showed in Repetier-Host, Web-Interface and Touchscreen are not correct. All axis are shown at max position (like after homing). After adding command M114, the position seems to be okay (X50, Y50, Z50). But sending a movement command from Repetier Host doesn't work like expected. Example: "Move X 10mm to left" sends the nozzle to X0 instead of X140, "X + 10mm" to X10.
Is there a way to fix this with custom gcode?
