Disabling in Configuration.h DECOUPLE_TEST ????

batonio

HI, morning. I am having the problem of stopped printing beacause of message:

"Error:One heater seems decoupled from thermistor". The problem is randomly sometimes I get 7 hours printing without problems and sometime 30 min. I have verified wiring and it´s ok

It Is the extruder´s heater beacause i don´t use heatbed. I have seen in others threats where is recomended disabling the decouple_test for testing porpouses, but I dont find the line in order to deactivate this feacture.

So I have modified the parameter Decouple hold variance to 999 but there is no diference.

Could you tell me how is disabled Decoupled_Test ?

Thanks in advanced

Repetier

Setting decouple time 0 disables the test.

batonio

Thanks a lot of.

I have read this phrase sometime in anothers threads but there is no parameters in configuration.h .

So I have arrived to conclusion the line to modify in Configuration.h is this

#define EXT0_DECOUPLE_TEST_PERIOD 12000

#define EXT0_DECOUPLE_TEST_PERIOD 0 -----> Disabled

Could you confirm that my assumption is correct ?

Thanks in advanced

Repetier

Yes, that is the one supposed to work.

batonio

Thanks a lot of.

It worked like a champ