Z-probe:NAN

boubouexpress

Hello

Cartesian printer

z max,y max et x max Getech Mechanical End Stop V1.2

z mini et z probe IR Z Probe 1.4

17:35:43.880 : Printer reset detected - initalizing

17:35:43.880 : start

17:35:43.880 : Info:External Reset

17:35:43.880 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000

17:35:43.880 : Free RAM:5045

17:35:43.882 : SelectExtruder:0

17:35:44.084 : FIRMWARE_NAME:Repetier_0.92.9 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:2 REPETIER_PROTOCOL:3

17:35:44.084 : Printed filament:0.00m Printing time:0 days 0 hours 0 min

17:35:44.084 : PrinterMode:FFF

17:35:44.084 : N10 M220 S10080

17:35:44.084 : N11 M221 S100*80

17:35:44.084 : N12 M111 S684

17:35:44.084 : N13 T0*8

17:35:44.088 : X:0.00 Y:0.00 Z:0.000 E:0.0000

17:35:44.088 : DebugLevel:6

17:35:44.088 : SelectExtruder:0

17:35:44.090 : Unknown command:N7 M20

17:35:44.107 : DebugLevel:6

17:35:44.107 : SelectExtruder:0

17:35:45.141 : N14 G2838

17:35:49.450 : X:274.00 Y:325.00 Z:218.000 E:0.0000

17:35:50.094 : N17 G1 X-50 F4800*36

17:35:51.033 : N21 G1 X-50 F480033

17:35:51.918 : N24 G1 Y-50 F4800*37

17:35:52.682 : N27 G1 Y-50 F480038

17:35:53.572 : N31 G1 Y-50 F4800*33

17:35:57.135 : N34 G30*45

17:36:56.073 : Z-probe:NAN X:174.00 Y:175.00

// ################ Endstop configuration #####################

#define ENDSTOP_PULLUP_X_MIN true

#define ENDSTOP_X_MIN_INVERTING false

#define MIN_HARDWARE_ENDSTOP_X false

#define ENDSTOP_PULLUP_Y_MIN true

#define ENDSTOP_Y_MIN_INVERTING false

#define MIN_HARDWARE_ENDSTOP_Y false

#define ENDSTOP_PULLUP_Z_MIN false

#define ENDSTOP_Z_MIN_INVERTING false

#define MIN_HARDWARE_ENDSTOP_Z true

#define ENDSTOP_PULLUP_X_MAX true

#define ENDSTOP_X_MAX_INVERTING true

#define MAX_HARDWARE_ENDSTOP_X true

#define ENDSTOP_PULLUP_Y_MAX true

#define ENDSTOP_Y_MAX_INVERTING true

#define MAX_HARDWARE_ENDSTOP_Y true

#define ENDSTOP_PULLUP_Z_MAX true

#define ENDSTOP_Z_MAX_INVERTING true

#define MAX_HARDWARE_ENDSTOP_Z true

#define max_software_endstop_r true

#define min_software_endstop_x true

#define min_software_endstop_y true

#define min_software_endstop_z false

#define max_software_endstop_x false

#define max_software_endstop_y false

#define max_software_endstop_z false

#define ENDSTOP_X_BACK_MOVE 5

#define ENDSTOP_Y_BACK_MOVE 5

#define ENDSTOP_Z_BACK_MOVE 2

#define ENDSTOP_X_RETEST_REDUCTION_FACTOR 3

#define ENDSTOP_Y_RETEST_REDUCTION_FACTOR 3

#define ENDSTOP_Z_RETEST_REDUCTION_FACTOR 3

#define ENDSTOP_X_BACK_ON_HOME 0

#define ENDSTOP_Y_BACK_ON_HOME 0

#define ENDSTOP_Z_BACK_ON_HOME 0

#define ALWAYS_CHECK_ENDSTOPS 1

// ################# XYZ movements ###################

#define X_ENABLE_ON 0

#define Y_ENABLE_ON 0

#define Z_ENABLE_ON 0

#define DISABLE_X 0

#define DISABLE_Y 0

#define DISABLE_Z 0

#define DISABLE_E 0

#define INVERT_X_DIR 1

#define INVERT_Y_DIR 1

#define INVERT_Z_DIR 1

#define X_HOME_DIR 1

#define Y_HOME_DIR 1

#define Z_HOME_DIR 1

#define X_MAX_LENGTH 274

#define Y_MAX_LENGTH 325

#define Z_MAX_LENGTH 218

#define X_MIN_POS 0

#define Y_MIN_POS 0

#define Z_MIN_POS 0

#define DISTORTION_CORRECTION 0

#define DISTORTION_CORRECTION_POINTS 5

#define DISTORTION_CORRECTION_R 100

#define DISTORTION_PERMANENT 1

#define DISTORTION_UPDATE_FREQUENCY 15

#define DISTORTION_START_DEGRADE 0.5

#define DISTORTION_END_HEIGHT 1

#define DISTORTION_EXTRAPOLATE_CORNERS 0

#define DISTORTION_XMIN 55

#define DISTORTION_YMIN 55

#define DISTORTION_XMAX 250

#define DISTORTION_YMAX 315

<div>// #################### Z-Probing #####################

#define Z_PROBE_Z_OFFSET 0

#define Z_PROBE_Z_OFFSET_MODE 0

#define UI_BED_COATING 1

#define FEATURE_Z_PROBE 1

#define Z_PROBE_BED_DISTANCE 5

#define Z_PROBE_PIN ORIG_Z_MIN_PIN

#define Z_PROBE_PULLUP 0

#define Z_PROBE_ON_HIGH 1

#define Z_PROBE_X_OFFSET 0

#define Z_PROBE_Y_OFFSET 0

#define Z_PROBE_WAIT_BEFORE_TEST 0

#define Z_PROBE_SPEED 2

#define Z_PROBE_XY_SPEED 150

#define Z_PROBE_SWITCHING_DISTANCE 4

#define Z_PROBE_REPETITIONS 2

#define Z_PROBE_HEIGHT 1.95

#define Z_PROBE_START_SCRIPT ""

#define Z_PROBE_FINISHED_SCRIPT ""

#define Z_PROBE_REQUIRES_HEATING 0

#define Z_PROBE_MIN_TEMPERATURE 150

#define FEATURE_AUTOLEVEL 1

#define Z_PROBE_X1 55

#define Z_PROBE_Y1 55

#define Z_PROBE_X2 55

#define Z_PROBE_Y2 250

#define Z_PROBE_X3 55

#define Z_PROBE_Y3 315

#define BED_LEVELING_METHOD 1

#define BED_CORRECTION_METHOD 0

#define BED_LEVELING_GRID_SIZE 5

#define BED_LEVELING_REPETITIONS 5

#define BED_MOTOR_1_X 55

#define BED_MOTOR_1_Y 55

#define BED_MOTOR_2_X 55

#define BED_MOTOR_2_Y 250

#define BED_MOTOR_3_X 55

#define BED_MOTOR_3_Y 315

#define BENDING_CORRECTION_A 0

#define BENDING_CORRECTION_B 0

#define BENDING_CORRECTION_C 0

#define FEATURE_AXISCOMP 0

#define AXISCOMP_TANXY 0

#define AXISCOMP_TANYZ 0

#define AXISCOMP_TANXZ 0

</div>

Repetier

NAN = Not a Number

This often happens if you have illegal values in eeprom, so please check eeprom settings with eeprom editor.

boubouexpress

My firmeware marlin 1.1.0-RC7 works I took the same parameter firmware repetier

boubouexpress

<blockquote rel="boubouexpress">everything is working