Cannot compile firmware, trying to follow a guide.

Wingnutt

<font face="Arial, Verdana">Im trying to flash my Davinci 2.0 by following this video:</font>

<font face="Arial, Verdana">https://www.youtube.com/watch?v=rjuCvlnpB7M<br/></span></font><br/>As directed I have downloaded the files directly from the links posted in the video description.<div>
</div><div>Repetier .92 master</div><div>
</div><div>and Arduino 1.5.8 beta.

Where things go south is at 3:15

Where he says to go to
Repetier-Firmware-0.92-master\src\ArduinoDUE\AdditionalArduinoFiles and click on the folder 1.5.8 and copy the hardwire folder.

There is no 1.5.8 folder. Just Arduino - 1.6.9 -Due 1.6.8 and Horus-0.2rc1

there is a hardware folder buried a few directories deeper so I tried just copying that one and following the rest of the tutorial but as i feared it does not work

When I open the repetier firmware file in Arduino, it will not compile, even if I leave it "stock" it wont compile.

I get the following error.

<div>Arduino: 1.5.8 (Windows 8), Board: "Arduino Due (Native USB Port)"</div><div>
</div><div>In file included from Repetier.h:572:0,</div><div> from BedLeveling.cpp:107:</div><div>HAL.h: In static member function 'static void HAL::serialSetBaudrate(long int)':</div><div>HAL.h:684:14: error: 'class UARTClass' has no member named 'setInterruptPriority'</div><div> Serial.setInterruptPriority(1);</div><div> ^</div><div>Error compiling.</div><div>
</div><div>

I'm using Windows 10 64bit of that matters.</div><div>

Any help is greatly appreciated, my 2 week old printer is a brick at this point :(</div>
</div>

Wingnutt

<font face="Arial, Verdana">UPADTE</font>

Ok so I opteed to follow the guide

here

<font face="Arial, Verdana">https://github.com/luc-github/Repetier-Firmware-0.92<br/></span></font><br/>everything went as specified, the flash went through as it should.

then the last message was that it was rebooting CPU.. then I started getting error messages from windows that the USB device has malfunctioned.

the printer is no longer recognized. if I plug it in I just get a continous stream of windows meaages "the last usb device you have connected has malfunctioned"

Thats it, thats all I get, over and over

printer still has just the 2 black bars.

Wingnutt

jumped 37 and started over.

it flashes in about 40 seconds then verifies the flash

verify successful

CPU reset. then nothing..

powercycle the printer and Im back to the constant error messages.

the one part that I may be screwing up is step 4

"Update variants.cpp arduino file with the one present in src\ArduinoDUE\AdditionalArduinoFile according your IDE version"

the variant file is located at:

<font color="#333333" face="-apple-system, BlinkMacSystemFont, Segoe UI, Roboto, Helvetica, Arial, sans-serif, Apple Color Emoji, Segoe UI Emoji, Segoe UI Symbol">C:Desktop\Repetier-Firmware-0.92-master\src\ArduinoDUE\AdditionalArduinoFiles\Arduino - 1.6.9 -Due 1.6.8\Arduino15\packages\arduino\hardware\sam\1.6.8\variants\arduino_due_x
</font>

But im not fully sure where to place that fine in the arduino program group, as I cannot find a variant.cpp file anywhere in its folder(s)

what am I missing?

Wingnutt

Well this isnt looking too prmosing.............

Wingnutt

<font face="Arial, Verdana">Ok i actually got it, it was windows screwing me </font>

<font face="Arial, Verdana">anyway, it seems to be working EXCEPT, no picture on the screen... </font>

<font face="Arial, Verdana">I noticed in config it says:</font>

<font face="Arial, Verdana">//Davinci screen is not standard reprap it is WINSTAR 16x4</font>

<font face="Arial, Verdana">#if DAVINCI==0</font>

<font face="Arial, Verdana">#define WINSTAR_SCREEN 0</font>

<font face="Arial, Verdana">#define WINSTAR_SCREEN 1</font>

<font face="Arial, Verdana">#endif

I dont know exactly how to interpret that, or what i should chance..</font>

Repetier

<font face="Arial, Verdana">Maybe you should try this fork especially for davinci printers:</font>

<font face="Arial, Verdana">https://github.com/luc-github/Repetier-Firmware-0.92</span></font><br/></div><div><font face="Arial, Verdana">
</font>

Wingnutt

That is what I am running.

The screen does not work and neither does the extruder heaters.

The bed heats but the extruders do not heat, i instead get:

""""Error:One heater seems decoupled from thermistor - disabling all for safety!"""

Considering the printer is a week old and functioned perfectly until loading this firmware, I really doubt its a hardware issue.

LUC

actually it is hardware issue, check here https://forum.voltivo.com/showthread.php?tid=8498&highlight=lcd