diamond hotend setup

Iamarobot

Hi all,

I have been trying to set up may diamond hotend printer in repetier. I have tried using the online config tool but it results in errors on build.

see below.

I began by loading the diamoned hotend config file from here http://reprap.org/wiki/File:DiamondRepetierConfiguration.h</div><div style="font-family: Arial, Verdana; font-size: 10pt; font-style: normal; font-variant: normal; font-weight: normal; line-height: normal;">The main changes were about selecting ->

Mixing Extruder (1 Nozzle/heater + 2 or more filament feeder) (MIXING_EXTRUDER)

and adding two extra extruders.

See excerpts from generated config file at end.

What is the correct steps for configuring a diamond hotend?

Thanks.

Extruder.cpp:44: error: 'TEMP_3_PIN' was not declared in this scope

Extruder.cpp: In static member function 'static void Extruder::initExtruder()':

Extruder.cpp:523: error: 'DIOORIG_E2_DIR_PIN_DDR' was not declared in this scope

Extruder.cpp:523: error: 'DIOORIG_E2_DIR_PIN_PIN' was not declared in this scope

Extruder.cpp:524: error: 'DIOORIG_E2_STEP_PIN_DDR' was not declared in this scope

Extruder.cpp:524: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp: In static member function 'static void Extruder::step()':

Extruder.cpp:921: error: 'DIOORIG_E2_STEP_PIN_WPORT' was not declared in this scope

Extruder.cpp:921: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp:921: error: 'DIOORIG_E2_STEP_PIN_WPORT' was not declared in this scope

Extruder.cpp:921: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp:1019: error: 'DIOORIG_E2_STEP_PIN_WPORT' was not declared in this scope

Extruder.cpp:1019: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp:1019: error: 'DIOORIG_E2_STEP_PIN_WPORT' was not declared in this scope

Extruder.cpp:1019: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp: In static member function 'static void Extruder::unstep()':

Extruder.cpp:1081: error: 'DIOORIG_E2_STEP_PIN_WPORT' was not declared in this scope

Extruder.cpp:1081: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp:1081: error: 'DIOORIG_E2_STEP_PIN_WPORT' was not declared in this scope

Extruder.cpp:1081: error: 'DIOORIG_E2_STEP_PIN_PIN' was not declared in this scope

Extruder.cpp: In static member function 'static void Extruder::setDirection(uint8_t)':

Extruder.cpp:1139: error: 'DIOORIG_E2_DIR_PIN_WPORT' was not declared in this scope

Extruder.cpp:1139: error: 'DIOORIG_E2_DIR_PIN_PIN' was not declared in this scope

Extruder.cpp:1139: error: 'DIOORIG_E2_DIR_PIN_WPORT' was not declared in this scope

Extruder.cpp:1139: error: 'DIOORIG_E2_DIR_PIN_PIN' was not declared in this scope

Extruder.cpp:1144: error: 'DIOORIG_E2_DIR_PIN_WPORT' was not declared in this scope

Extruder.cpp:1144: error: 'DIOORIG_E2_DIR_PIN_PIN' was not declared in this scope

Extruder.cpp:1144: error: 'DIOORIG_E2_DIR_PIN_WPORT' was not declared in this scope

Extruder.cpp:1144: error: 'DIOORIG_E2_DIR_PIN_PIN' was not declared in this scope

Extruder.cpp: In static member function 'static void Extruder::enable()':

Extruder.cpp:1210: error: 'DIOORIG_E2_ENABLE_PIN_WPORT' was not declared in this scope

Extruder.cpp:1210: error: 'DIOORIG_E2_ENABLE_PIN_PIN' was not declared in this scope

Extruder.cpp:1210: error: 'DIOORIG_E2_ENABLE_PIN_WPORT' was not declared in this scope

Extruder.cpp:1210: error: 'DIOORIG_E2_ENABLE_PIN_PIN' was not declared in this scope

Extruder.cpp: In static member function 'static void Extruder::disableCurrentExtruderMotor()':

Extruder.cpp:1715: error: 'DIOORIG_E2_ENABLE_PIN_WPORT' was not declared in this scope

Extruder.cpp:1715: error: 'DIOORIG_E2_ENABLE_PIN_PIN' was not declared in this scope

Extruder.cpp:1715: error: 'DIOORIG_E2_ENABLE_PIN_WPORT' was not declared in this scope

Extruder.cpp:1715: error: 'DIOORIG_E2_ENABLE_PIN_PIN' was not declared in this scope

Extruder.cpp: At global scope:

Extruder.cpp:2577: error: 'ORIG_E2_ENABLE_PIN' was not declared in this scope

from config file

#define EXT2_TEMPSENSOR_PIN TEMP_3_PIN

"sensorPin": "TEMP_3_PIN",

#define EXT2_X_OFFSET 0

#define EXT2_Y_OFFSET 0

#define EXT2_Z_OFFSET 0

#define EXT2_STEPS_PER_MM 370

#define EXT2_TEMPSENSOR_TYPE 1

#define EXT2_TEMPSENSOR_PIN TEMP_3_PIN

#define EXT2_HEATER_PIN HEATER_3_PIN

#define EXT2_STEP_PIN ORIG_E2_STEP_PIN

#define EXT2_DIR_PIN ORIG_E2_DIR_PIN

#define EXT2_INVERSE 1

#define EXT2_ENABLE_PIN ORIG_E2_ENABLE_PIN

#define EXT2_ENABLE_ON 0

#define EXT2_MIRROR_STEPPER 0

#define EXT2_STEP2_PIN ORIG_E2_STEP_PIN

#define EXT2_DIR2_PIN ORIG_E2_DIR_PIN

#define EXT2_INVERSE2 0

#define EXT2_ENABLE2_PIN ORIG_E2_ENABLE_PIN

#define EXT2_MAX_FEEDRATE 50

#define EXT2_MAX_START_FEEDRATE 20

#define EXT2_MAX_ACCELERATION 5000

#define EXT2_HEAT_MANAGER 3

#define EXT2_WATCHPERIOD 1

#define EXT2_PID_INTEGRAL_DRIVE_MAX 230

#define EXT2_PID_INTEGRAL_DRIVE_MIN 40

#define EXT2_PID_PGAIN_OR_DEAD_TIME 7

#define EXT2_PID_I 2

#define EXT2_PID_D 40

#define EXT2_PID_MAX 255

#define EXT2_ADVANCE_K 0

#define EXT2_ADVANCE_L 0

#define EXT2_ADVANCE_BACKLASH_STEPS 0

#define EXT2_WAIT_RETRACT_TEMP 150

#define EXT2_WAIT_RETRACT_UNITS 0

#define EXT2_SELECT_COMMANDS ""

#define EXT2_DESELECT_COMMANDS ""

#define EXT2_EXTRUDER_COOLER_PIN -1

#define EXT2_EXTRUDER_COOLER_SPEED 255

#define EXT2_DECOUPLE_TEST_PERIOD 12000

#define EXT2_JAM_PIN -1

#define EXT2_JAM_PULLUP 0

#define FEATURE_TWO_ZSTEPPER 0

#define Z2_STEP_PIN ORIG_E1_STEP_PIN

#define Z2_DIR_PIN ORIG_E1_DIR_PIN

#define Z2_ENABLE_PIN ORIG_E1_ENABLE_PIN

#define FEATURE_THREE_ZSTEPPER 0

#define Z3_STEP_PIN ORIG_E2_STEP_PIN

#define Z3_DIR_PIN ORIG_E2_DIR_PIN

#define Z3_ENABLE_PIN ORIG_E2_ENABLE_PIN

wertyfrog

#define Motherboard 33 in the config file means Ramps 1.4 is that what you are using?

As it only has 2 extruder stepper drivers, ORIG_E2_STEP_PIN, ORIG_E2_DIR_PIN and ORIG_E2_ENABLE_PIN are not defined in pins.h it need to know where the 3 pins for extruder 3 (E2) are connected.

You could either add the definitions to the ramps section of pins.h:

#define ORIG_E2_STEP_PIN your pin here

#define ORIG_E2_DIR_PIN your pin here

#define ORIG_E2_ENABLE_PIN your pin here

Or, just edit the config file to reference the correct pins directly (untested, will this work?)

#define EXT2_ENABLE_PIN Your pin number

#define EXT2_STEP2_PIN Your pin number

#define EXT2_DIR2_PIN Your pin number