Adding custom temperature for monitoring...

BigAl

Hello,

I use the Repetier Server Pro on a Raspberry Pi 4. I recently added my new Prusa Core One. Now I want to monitor my chamber temperature in status bar. The temperature is in the response message from M105 shown as "C@:##.##".
How can I add this temperature reading?

Alex

Repetier

Did you already add a heated chamber? When you do it makes the parser read and show chamber temperatures. Should be C:temp - C@:val should be output power. If you did already add it and it does not show please copy temperature responses from output and paste them here, so I can test them how parser would handle it in case they modified the format from other firmwares which we understand.

BigAl

The M105 response look like this:

Recv:16:27:02.882: T:255.14/255.00 B:85.07/85.00 X:52.54/36.00 A:50.21/0.00 @:126 B@:127 C@:35.09 HBR@:255

The C@:temp is definitely the chamber temperature. I have checked this several times. The Core One does not have active chamber heating. Therefore. I only see the current measurement.

I had a look to the github page of the firmware. There are some discussions about this. It seems it's a bug in the firmwar:
https://github.com/prusa3d/Prusa-Firmware-Buddy/pull/4671

So anyway: Is there an option to parse the value myself as long it is not solved?