Z Probe Auto bed leveling Issue

peta

Hi,

i installed a z level sensor. When i try to upload my configuration which i changed like the how to from this homepage i get some errors.

This is the are i changed:

#define Z_PROBE_Z_OFFSET 0

#define Z_PROBE_Z_OFFSET_MODE 0

#define UI_BED_COATING 1

#define FEATURE_Z_PROBE true

#define Z_PROBE_BED_DISTANCE 10

#define Z_PROBE_PIN 17

#define Z_PROBE_PULLUP true

#define Z_PROBE_ON_HIGH true

#define Z_PROBE_X_OFFSET -50,49

#define Z_PROBE_Y_OFFSET -18,77

#define Z_PROBE_WAIT_BEFORE_TEST 0

#define Z_PROBE_SPEED 5

#define Z_PROBE_XY_SPEED 150

#define Z_PROBE_SWITCHING_DISTANCE 1.5

#define Z_PROBE_REPETITIONS 3

#define Z_PROBE_HEIGHT 39.91

#define Z_PROBE_START_SCRIPT ""

#define Z_PROBE_FINISHED_SCRIPT ""

#define Z_PROBE_REQUIRES_HEATING 0

#define Z_PROBE_MIN_TEMPERATURE 150

#define FEATURE_AUTOLEVEL 1

#define Z_PROBE_X1 -142.2

#define Z_PROBE_Y1 30

#define Z_PROBE_X2 -3.20

#define Z_PROBE_Y2 30

#define Z_PROBE_X3 -73.20

#define Z_PROBE_Y3 170

#define BED_LEVELING_METHOD 0

#define BED_CORRECTION_METHOD 0

#define BED_LEVELING_GRID_SIZE 5

#define BED_LEVELING_REPETITIONS 5

#define BED_MOTOR_1_X 0

#define BED_MOTOR_1_Y 0

#define BED_MOTOR_2_X 200

#define BED_MOTOR_2_Y 0

#define BED_MOTOR_3_X 100

#define BED_MOTOR_3_Y 200

#define BENDING_CORRECTION_A 0

#define BENDING_CORRECTION_B 0

#define BENDING_CORRECTION_C 0

#define FEATURE_AXISCOMP 0

#define AXISCOMP_TANXY 0

#define AXISCOMP_TANYZ 0

#define AXISCOMP_TANXZ 0

The error i get when i try to upload it it is:

<div> This report would have more information with

"Show verbose output during compilation"

enabled in File > Preferences.

Arduino: 1.0.6 (Windows NT (unknown)), Board: "Melzi 1284p 16mhz"

Eeprom.cpp: In static member function 'static void EEPROM::initalizeUncached()':

Eeprom.cpp:469: error: no matching function for call to 'HAL::eprSetFloat(int, int, int)'

/HAL.h:532: note: candidates are: static void HAL::eprSetFloat(unsigned int, float)

Eeprom.cpp:470: error: no matching function for call to 'HAL::eprSetFloat(int, int, int)'

/HAL.h:532: note: candidates are: static void HAL::eprSetFloat(unsigned int, float)

Eeprom.cpp: In static member function 'static void EEPROM::readDataFromEEPROM(bool)':

Eeprom.cpp:659: error: no matching function for call to 'HAL::eprSetFloat(int, int, int)'

/HAL.h:532: note: candidates are: static void HAL::eprSetFloat(unsigned int, float)

Eeprom.cpp:660: error: no matching function for call to 'HAL::eprSetFloat(int, int, int)'

/HAL.h:532: note: candidates are: static void HAL::eprSetFloat(unsigned int, float)

Thanks for any help!

</div>

Repetier

you wrote

#define Z_PROBE_X_OFFSET -50,49

#define Z_PROBE_Y_OFFSET -18,77

with , instead of .