Send ETA to LCD

nmaggioni

It's be nice if ETA/ETE could be sent to the printer's LCD panel just like Repetier-Host does. What differs in Repetier-Server?

Repetier

Maybe for 0.80. 0.70 is feature closed. We didn't do it initally thinking server would replace LCD, but that is often the case as we learned.

xBot150

Hello, using 0.75.1 Pro here
-> seems to me it got in anyways ;-)

BUT there might be a bug or two:
--logfile--
20:11:22.400: N47691 G1 X59.781 Y45.239 E1405.00424
20:11:22.478: N47692 G1 X59.397 Y45.424 E1405.01354
20:11:22.479: N47693 G1 X57.280 Y46.646 E1405.06690
20:11:22.480: M117 ETE 04:45:06
20:11:22.671: N47694 G1 X55.234 Y48.036 E1405.12088
20:11:22.833: N47695 G1 X53.286 Y49.580 E1405.17514
20:11:22.835: N47696 G0 F3420 X53.513 Y49.846
20:11:22.835: echo:Unknown command: "45"
20:11:22.837: N47697 G1 F2160 X51.694 Y51.523 E1405.22914
20:11:22.838: echo:Unknown command: "06"
20:11:22.838: N47698 G1 X49.917 Y53.424 E1405.28594
20:11:22.842: N47699 G1 X48.433 Y55.285 E1405.33789
20:11:22.843: N47700 G1 X47.008 Y57.363 E1405.39289
--/logfile--

on the display you see just "ETE 04" or "ETA xx", "Layer xx/yy" is displayed correctly.
I'm NOT sure whether these errors are related to this bug or there's something fishy going on with my printer:
--
20:11:53.590: Resend: N48198 G1 X107.277 Y65.060 E1422.31909
20:11:53.591: Resend: N48199 G1 X106.842 Y63.677 E1422.35074
20:11:53.591: N48200 M105
20:11:53.592: N48201 G1 X105.963 Y61.461 E1422.40277
20:11:53.597: N48202 G1 X104.761 Y58.980 E1422.46295
20:11:53.598: N48203 G1 X104.082 Y57.822 E1422.49225
20:11:53.614: N48204 G1 X103.431 Y56.722 E1422.52015
20:11:53.713: N48205 G1 X102.996 Y56.095 E1422.53680
20:11:53.713: Error:checksum mismatch, Last Line: 48202
20:11:53.825: Resend: N48203 G1 X104.082 Y57.822 E1422.49225
20:11:53.825: Resend: 48203
20:11:53.826: Resend: N48204 G1 X103.431 Y56.722 E1422.52015
20:11:53.827: Resend: N48205 G1 X102.996 Y56.095 E1422.53680
20:11:53.827: Error:Line Number is not Last Line Number+1, Last Line: 48202
20:12:13.019: echo:Unknown command: "56"
20:12:13.020: echo:Unknown command: "28 day 15"
20:12:13.208: Error:checksum mismatch, Last Line: 48545
20:12:13.318: Resend: 48546
20:12:13.369: Error:Line Number is not Last Line Number+1, Last Line: 48545
20:12:13.478: Resend: 48546
20:12:13.488: Error:Line Number is not Last Line Number+1, Last Line: 48545
20:12:13.599: Resend: 48546
20:12:13.610: Error:Line Number is not Last Line Number+1, Last Line: 48545
20:12:13.610: Resend after 401ms
20:12:13.720: Resend: 48546
20:12:22.930: echo:Unknown command: "44"
20:12:22.933: echo:Unknown command: "06"
20:12:23.128: Error:checksum mismatch, Last Line: 48681
20:12:23.237: Resend: 48682
20:12:43.084: echo:Unknown command: "56"
20:12:43.087: echo:Unknown command: "28 day 15"
20:12:43.403: Error:checksum mismatch, Last Line: 49029
20:12:43.516: Resend: 49030
20:12:49.093: N49147 G1 X94.481 Y103.341 E1454.09395
20:12:49.094: N49148 G1 X92.355 Y104.692 E1454.14893
20:12:49.284: N49149 G1 X90.137 Y105.883 E1454.20388
20:12:49.285: N49150 G1 X87.849 Y106.903 E1454.25856
20:12:49.444: N49151 G1 X85.458 Y107.765 E1454.31404
20:12:49.445: N49152 G1 X83.055 Y108.439 E1454.36851
20:12:49.571: N49153 G1 X80.570 Y108.942 E1454.42385
20:12:49.572: N49154 G1 X78.068 Y109.261 E1454.47890
20:12:49.579: N49155 M105
20:12:49.760: N49156 G1 X75.562 Y109.396 E1454.53368
20:12:49.854: N49157 G1 X73.038 Y109.347 E1454.58878
20:12:50.042: N49158 G1 X71.005 Y109.160 E1454.63334
20:12:50.051: N49159 G1 X70.523 Y109.114 E1454.64391
20:12:50.052: N49160 G1 X68.143 Y108.718 E1454.69657
20:12:50.136: N49161 G1 X67.420 Y108.551 E1454.71277
20:12:50.140: N49162 G1 X65.579 Y108.098 E1454.75415
20:12:50.230: N49163 G1 X64.617 Y107.786 E1454.77623
20:12:50.234: N49164 G1 X63.169 Y107.313 E1454.80948
20:12:50.423: N49165 G1 X60.811 Y106.350 E1454.86507
20:12:50.424: N49166 G1 X59.672 Y105.786 E1454.89281
20:12:50.546: N49167 G1 X58.526 Y105.213 E1454.92078
--

Please contact me directly via email if you need more infos.

all the best and please do continue, Repetier is by far the best of all kits I've seen so far.

Thankyou!

Repetier

That is a problem with older marlin firmware (and also repetier if using ascii mode). There : is a command separation sign so the time gets several commands. Next release therefore replaces in ascii mode the : with . which looks a bit strange but at least causes no errors then. Until then select "show layer" instead of time or rotation. Or update to a newer marlin version where the ":" handling on serial has been removed (not sure when, RC version does have it removed).