dragonsimig Hi so im running my repetier from raspberry pi mager for PI 5 and it wont boot it wont show the logo just led turn green and turns red after it it blinks green once and thats it
Repetier Are you using latest image V38? Only the bookworm images can boot on a pi 5. Bullseye image has no kernel compatible with pi 4.
dragonsimig I tried everything change sd card image from your site , raspberry pi imgaer nothing works
Repetier Strange thing I got same problem and even original image did not boot. First is to check flash codes for reason using this:https://www.raspberrypi.com/documentation/computers/configuration.html#led-warning-flash-codes<br/><br/>I had 3 long 1 short flashs indicated an eeprom error. Fix was to burn using raspberry pi imager this image: Misc utility Images -> Bootloader (Pi 5 family) -> SD Card BootAfter it was finished led started flashing quickly. Switched back to our image and it bootet fine.If you have other error solution might differ.
dragonsimig thanks im trying it right nowi just buyed new sd card for this so i will try that right now
Repetier Which flashcode does it show in your case? My solution is espcially for 3 long 1 short flash. Tested with 1.4.18 V38 Image.
