I hope you can help; I’m new to 3D printing
and Repetier. Tried searching internet & this forum but can’t find an answer
to what is probably a simple thing to do.
I am in the process of converting my Wanhao
D5S mini to use 1.75mm filament, so have installed Jaco Theron’s completely open
source Repetier version of the firmware so I have more control of the machine
setup.
https://github.com/Jacotheron/Repetier-1.0.3-Wanhao-D5S
The original Wahhao firmware has an option
to move the nozzle just above each bed leveling screw, pause while any
adjustment is made. Pressing the knob then moves to the machine to the next
screw position.
I’m trying to replicate this with a gcode
file. An
M0 on the ender 3 seems to make the machine pause ok, how do I replicate
this in Repieter firmware?
Many thanks for your help
Dave
Gcode file contents for the ender 3:-
;FLAVOR:Marlin
;Layer height: 0.2
; M190 S60 ;Bed Temp Temp -- Change this
; M104 S0 ;Extruder Temp -- Set to 0 for
initial calibration
; M109 S ;Extruder Temp -- Set to 0 for
initial calibration
; M82 ;absolute extrusion mode
;Basic settings:
;Layer height: 0.2
;Walls: 0.8
;Top/Bottom: 0.6
;Fill: 10
;Retraction Distance: 7
;Retraction Speed: 60
G28 ;Home
; Calibration Round 1
G1 Z10 ; Lift Z axis
G1 X75 Y160 F2400; Move to Position 1
G1 Z0
M0 ; Pause print
G1 Z10 ; Lift Z axis
G1 X240 Y160 F2400; Move to Position 2
G1 Z0
M0 ; Pause print
G1 Z10 ; Lift Z axis
G1 X160 Y0 F2400 ; Move to Position 3
G1 Z0
M0 ; Pause print
G28 ;Home
; use this line if just one round
of calibration
