Image ist neu. Aber konnte natürlich nicht wiederstehen, das Linux mit apt-get update und upgrade auf den neuesten Stand zu bringen. Ist das genrell keine gute Idee ?
Hab auch schon etwas weiter probiert, den Fehler einzukreisen und bin bei der SD-Card hängen geblieben. Ist ja noch ein Sparklab-LCD angeschlossen, was ja auch funktioniert. SD-Karten nutze ich nicht, dafür habe ich ja den Repetier-Server mit Touchpanel ;)
Habe dann einfach über den Repetier Firmware Configurator V1.05 mal das Panel deaktiviert und die Firmware ohne Panel mal aufgespielt. Der Verbindungsfehler scheint damit weg zu sein. Der SD Init Fail ist trotzdem noch da, aber er macht keinen Reset mehr. Wäre aber trotzdem schön, wenn es auch mit LCD funktionieren würde. Vor allem ist es mir ein Rätsel, warum das bei den Repetier-Server Versionen unterschiedlich ist.
Anbei die Logs mit dem LCD an und dem Fehler der Abbrüche :
Recv:15:21:15.054: Ignore due to resend: Error:Wrong checksum
Recv:15:21:15.066: Waiting for resend requests finished. Starting resends ...
Send:15:21:15.066: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:15.276: Resend:22
Recv:15:21:15.278: Ignore due to resend: ok
Recv:15:21:15.280: Ignore due to resend: Error:Wrong checksum
Recv:15:21:15.292: Waiting for resend requests finished. Starting resends ...
Send:15:21:15.292: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:15.502: Resend:22
Recv:15:21:15.509: Ignore due to resend: ok
Recv:15:21:15.509: Ignore due to resend: Error:Wrong checksum
Recv:15:21:15.517: Waiting for resend requests finished. Starting resends ...
Send:15:21:15.518: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:15.727: Resend:22
Recv:15:21:15.729: Ignore due to resend: ok
Recv:15:21:15.731: Ignore due to resend: Error:Wrong checksum
Recv:15:21:15.743: Waiting for resend requests finished. Starting resends ...
Send:15:21:15.743: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:15.951: Resend:22
Recv:15:21:15.954: Ignore due to resend: ok
Recv:15:21:15.955: Ignore due to resend: Error:Wrong checksum
Recv:15:21:15.968: Waiting for resend requests finished. Starting resends ...
Send:15:21:15.968: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:16.267: Resend:22
Recv:15:21:16.269: Ignore due to resend: ok
Recv:15:21:16.271: Ignore due to resend: Error:Wrong checksum
Recv:15:21:16.283: Waiting for resend requests finished. Starting resends ...
Send:15:21:16.283: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:16.493: Resend:22
Mesg:15:21:16.494: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Mesg:15:21:16.496: Received extra ok - ignored
Recv:15:21:16.496: ok
Mesg:15:21:17.629: Dtr: true Rts: true
Mesg:15:21:17.629: Connection continued
Recv:15:21:17.630: d:22
Mesg:15:21:17.630: Received extra ok - ignored
Recv:15:21:17.630: ok
Send:15:21:17.630: Slow command added:M190 S85
Send:15:21:17.630: Resend: N23 M190 S85
Recv:15:21:17.634: Resend:22
Recv:15:21:17.636: Ignore due to resend: ok
Recv:15:21:17.636: Ignore due to resend: Resend:22
Recv:15:21:17.636: Ignore due to resend: ok
Recv:15:21:17.636: Ignore due to resend: Resend:22
Recv:15:21:17.636: Ignore due to resend: ok
Recv:15:21:17.643: Ignore due to resend: Error:Wrong checksum (2)
Recv:15:21:17.648: Waiting for resend requests finished. Starting resends ...
Send:15:21:17.648: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:17.856: Resend:22
Recv:15:21:17.859: Ignore due to resend: ok
Recv:15:21:17.860: Ignore due to resend: Error:Wrong checksum
Recv:15:21:17.872: Waiting for resend requests finished. Starting resends ...
Send:15:21:17.872: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:18.082: Resend:22
Recv:15:21:18.085: Ignore due to resend: ok
Recv:15:21:18.086: Ignore due to resend: Error:Wrong checksum
Recv:15:21:18.098: Waiting for resend requests finished. Starting resends ...
Send:15:21:18.099: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:18.307: Resend:22
Recv:15:21:18.309: Ignore due to resend: ok
Recv:15:21:18.310: Ignore due to resend: Error:Wrong checksum
Recv:15:21:18.322: Waiting for resend requests finished. Starting resends ...
Send:15:21:18.322: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:18.532: Resend:22
Recv:15:21:18.534: Ignore due to resend: ok
Recv:15:21:18.541: Ignore due to resend: Error:Wrong checksum
Recv:15:21:18.548: Waiting for resend requests finished. Starting resends ...
Send:15:21:18.548: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:18.758: Resend:22
Recv:15:21:18.760: Ignore due to resend: ok
Recv:15:21:18.761: Ignore due to resend: Error:Wrong checksum
Recv:15:21:18.773: Waiting for resend requests finished. Starting resends ...
Send:15:21:18.774: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:18.983: Resend:22
Recv:15:21:18.986: Ignore due to resend: ok
Recv:15:21:18.987: Ignore due to resend: Error:Wrong checksum
Recv:15:21:18.999: Waiting for resend requests finished. Starting resends ...
Send:15:21:18.999: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:19.249: Resend:22
Recv:15:21:19.251: Ignore due to resend: ok
Recv:15:21:19.253: Ignore due to resend: Error:Wrong checksum
Recv:15:21:19.265: Waiting for resend requests finished. Starting resends ...
Send:15:21:19.265: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:19.474: Resend:22
Mesg:15:21:19.474: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Mesg:15:21:19.475: Received extra ok - ignored
Recv:15:21:19.475: ok
Mesg:15:21:20.621: Dtr: true Rts: true
Mesg:15:21:20.621: Connection continued
Recv:15:21:20.624: Resend:22
Recv:15:21:20.626: Ignore due to resend: ok
Recv:15:21:20.626: Ignore due to resend: Resen
Recv:15:21:20.626: Ignore due to resend: (
Recv:15:21:20.626: Ignore due to resend: ok
Recv:15:21:20.626: Ignore due to resend: Resend:22
Recv:15:21:20.626: Ignore due to resend: ok
Recv:15:21:20.629: Ignore due to resend: Error:Wrong checksum
Recv:15:21:20.638: Waiting for resend requests finished. Starting resends ...
Send:15:21:20.638: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:20.847: Resend:22
Recv:15:21:20.849: Ignore due to resend: ok
Recv:15:21:20.851: Ignore due to resend: Error:Wrong checksum
Recv:15:21:20.863: Waiting for resend requests finished. Starting resends ...
Send:15:21:20.863: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:21.072: Resend:22
Recv:15:21:21.076: Ignore due to resend: ok
Recv:15:21:21.076: Ignore due to resend: Error:Wrong checksum
Recv:15:21:21.088: Waiting for resend requests finished. Starting resends ...
Send:15:21:21.088: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:21.298: Resend:22
Recv:15:21:21.300: Ignore due to resend: ok
Recv:15:21:21.301: Ignore due to resend: Error:Wrong checksum
Recv:15:21:21.313: Waiting for resend requests finished. Starting resends ...
Send:15:21:21.313: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:21.518: Resend:22
Recv:15:21:21.522: Ignore due to resend: ok
Recv:15:21:21.522: Ignore due to resend: Error:Wrong checksum
Recv:15:21:21.541: Waiting for resend requests finished. Starting resends ...
Send:15:21:21.541: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:21.747: Resend:22
Recv:15:21:21.750: Ignore due to resend: ok
Recv:15:21:21.751: Ignore due to resend: Error:Wrong checksum
Recv:15:21:21.763: Waiting for resend requests finished. Starting resends ...
Send:15:21:21.763: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:21.973: Resend:22
Recv:15:21:21.975: Ignore due to resend: ok
Recv:15:21:21.977: Ignore due to resend: Error:Wrong checksum
Recv:15:21:21.989: Waiting for resend requests finished. Starting resends ...
Send:15:21:21.989: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:22.231: Resend:22
Recv:15:21:22.233: Ignore due to resend: ok
Recv:15:21:22.235: Ignore due to resend: Error:Wrong checksum
Recv:15:21:22.247: Waiting for resend requests finished. Starting resends ...
Send:15:21:22.248: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:22.456: Resend:22
Mesg:15:21:22.456: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Mesg:15:21:22.457: Received extra ok - ignored
Recv:15:21:22.457: ok
Mesg:15:21:23.595: Dtr: true Rts: true
Mesg:15:21:23.595: Connection continued
Recv:15:21:23.598: Resend:22
Recv:15:21:23.600: Ignore due to resend: ok
Recv:15:21:23.600: Ignore due to resend: Resen
Recv:15:21:23.600: Ignore due to resend: (_
Recv:15:21:23.600: Ignore due to resend: ok
Recv:15:21:23.600: Ignore due to resend: Resend:22
Recv:15:21:23.600: Ignore due to resend: ok
Recv:15:21:23.604: Ignore due to resend: Error:Wrong checksum
Recv:15:21:23.612: Waiting for resend requests finished. Starting resends ...
Send:15:21:23.613: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:23.820: Resend:22
Recv:15:21:23.822: Ignore due to resend: ok
Recv:15:21:23.824: Ignore due to resend: Error:Wrong checksum
Recv:15:21:23.836: Waiting for resend requests finished. Starting resends ...
Send:15:21:23.836: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:24.046: Resend:22
Recv:15:21:24.048: Ignore due to resend: ok
Recv:15:21:24.050: Ignore due to resend: Error:Wrong checksum
Recv:15:21:24.062: Waiting for resend requests finished. Starting resends ...
Send:15:21:24.062: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:24.287: Resend:22
Recv:15:21:24.289: Ignore due to resend: ok
Recv:15:21:24.291: Ignore due to resend: Error:Wrong checksum
Recv:15:21:24.303: Waiting for resend requests finished. Starting resends ...
Send:15:21:24.303: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:24.513: Resend:22
Recv:15:21:24.515: Ignore due to resend: ok
Recv:15:21:24.517: Ignore due to resend: Error:Wrong checksum
Recv:15:21:24.529: Waiting for resend requests finished. Starting resends ...
Send:15:21:24.529: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:24.740: Resend:22
Recv:15:21:24.743: Ignore due to resend: ok
Recv:15:21:24.747: Ignore due to resend: Error:Wrong checksum
Recv:15:21:24.756: Waiting for resend requests finished. Starting resends ...
Send:15:21:24.756: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:24.967: Resend:22
Recv:15:21:24.969: Ignore due to resend: ok
Recv:15:21:24.971: Ignore due to resend: Error:Wrong checksum
Recv:15:21:24.983: Waiting for resend requests finished. Starting resends ...
Send:15:21:24.983: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:25.209: Resend:22
Recv:15:21:25.211: Ignore due to resend: ok
Recv:15:21:25.213: Ignore due to resend: Error:Wrong checksum
Recv:15:21:25.225: Waiting for resend requests finished. Starting resends ...
Send:15:21:25.225: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:25.434: Resend:22
Mesg:15:21:25.434: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Mesg:15:21:25.435: Received extra ok - ignored
Recv:15:21:25.435: ok
Offl:15:21:25.435: Ignored (offline):M117 ETA 16:06:20 day 24
Mesg:15:21:26.568: Dtr: true Rts: true
Mesg:15:21:26.569: Connection continued
Recv:15:21:26.571: Resend:22
Recv:15:21:26.573: Ignore due to resend: ok
Recv:15:21:26.573: Ignore due to resend: Resend:22
Recv:15:21:26.573: Ignore due to resend: ok
Recv:15:21:26.574: Ignore due to resend: (@:0
Recv:15:21:26.574: Ignore due to resend: Resend:22
Recv:15:21:26.574: Ignore due to resend: ok
Recv:15:21:26.577: Ignore due to resend: Error:Wrong checksum
Recv:15:21:26.585: Waiting for resend requests finished. Starting resends ...
Send:15:21:26.585: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:26.794: Resend:22
Recv:15:21:26.797: Ignore due to resend: ok
Recv:15:21:26.798: Ignore due to resend: Error:Wrong checksum
Recv:15:21:26.810: Waiting for resend requests finished. Starting resends ...
Send:15:21:26.810: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:27.020: Resend:22
Recv:15:21:27.022: Ignore due to resend: ok
Recv:15:21:27.024: Ignore due to resend: Error:Wrong checksum
Recv:15:21:27.036: Waiting for resend requests finished. Starting resends ...
Send:15:21:27.036: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:27.265: Resend:22
Recv:15:21:27.268: Ignore due to resend: ok
Recv:15:21:27.269: Ignore due to resend: Error:Wrong checksum
Recv:15:21:27.283: Waiting for resend requests finished. Starting resends ...
Send:15:21:27.283: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:27.490: Resend:22
Recv:15:21:27.492: Ignore due to resend: ok
Recv:15:21:27.494: Ignore due to resend: Error:Wrong checksum
Recv:15:21:27.506: Waiting for resend requests finished. Starting resends ...
Send:15:21:27.507: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:27.716: Resend:22
Recv:15:21:27.718: Ignore due to resend: ok
Recv:15:21:27.720: Ignore due to resend: Error:Wrong checksum
Recv:15:21:27.731: Waiting for resend requests finished. Starting resends ...
Send:15:21:27.731: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:27.941: Resend:22
Recv:15:21:27.944: Ignore due to resend: ok
Recv:15:21:27.945: Ignore due to resend: Error:Wrong checksum
Recv:15:21:27.957: Waiting for resend requests finished. Starting resends ...
Send:15:21:27.957: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:28.167: Resend:22
Recv:15:21:28.169: Ignore due to resend: ok
Recv:15:21:28.171: Ignore due to resend: Error:Wrong checksum
Recv:15:21:28.183: Waiting for resend requests finished. Starting resends ...
Send:15:21:28.183: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:28.392: Resend:22
Mesg:15:21:28.392: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Mesg:15:21:28.392: Received extra ok - ignored
Recv:15:21:28.392: ok
Mesg:15:21:29.520: Dtr: true Rts: true
Mesg:15:21:29.520: Connection continued
Recv:15:21:29.523: Resend:22
Recv:15:21:29.525: Ignore due to resend: ok
Recv:15:21:29.525: Ignore due to resend: Resend:22
Recv:15:21:29.525: Ignore due to resend: ok
Recv:15:21:29.525: Ignore due to resend: (_@:0
Recv:15:21:29.525: Ignore due to resend: Resend:22
Recv:15:21:29.525: Ignore due to resend: ok
Recv:15:21:29.527: Ignore due to resend: Error:Wrong checksum
Recv:15:21:29.536: Waiting for resend requests finished. Starting resends ...
Send:15:21:29.537: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:29.748: Resend:22
Recv:15:21:29.750: Ignore due to resend: ok
Recv:15:21:29.751: Ignore due to resend: Error:Wrong checksum
Recv:15:21:29.763: Waiting for resend requests finished. Starting resends ...
Send:15:21:29.763: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:29.973: Resend:22
Recv:15:21:29.975: Ignore due to resend: ok
Recv:15:21:29.977: Ignore due to resend: Error:Wrong checksum
Recv:15:21:29.989: Waiting for resend requests finished. Starting resends ...
Send:15:21:29.989: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:30.251: Resend:22
Recv:15:21:30.253: Ignore due to resend: ok
Recv:15:21:30.255: Ignore due to resend: Error:Wrong checksum
Recv:15:21:30.267: Waiting for resend requests finished. Starting resends ...
Send:15:21:30.267: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:30.476: Resend:22
Recv:15:21:30.478: Ignore due to resend: ok
Recv:15:21:30.481: Ignore due to resend: Error:Wrong checksum
Recv:15:21:30.492: Waiting for resend requests finished. Starting resends ...
Send:15:21:30.492: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:30.702: Resend:22
Recv:15:21:30.704: Ignore due to resend: ok
Recv:15:21:30.706: Ignore due to resend: Error:Wrong checksum
Recv:15:21:30.718: Waiting for resend requests finished. Starting resends ...
Send:15:21:30.718: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:30.927: Resend:22
Recv:15:21:30.930: Ignore due to resend: ok
Recv:15:21:30.931: Ignore due to resend: Error:Wrong checksum
Recv:15:21:30.944: Waiting for resend requests finished. Starting resends ...
Send:15:21:30.945: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:31.153: Resend:22
Recv:15:21:31.155: Ignore due to resend: ok
Recv:15:21:31.157: Ignore due to resend: Error:Wrong checksum
Recv:15:21:31.169: Waiting for resend requests finished. Starting resends ...
Send:15:21:31.169: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:31.378: Resend:22
Mesg:15:21:31.379: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Mesg:15:21:31.379: Received extra ok - ignored
Recv:15:21:31.379: ok
Mesg:15:21:32.524: Dtr: true Rts: true
Mesg:15:21:32.524: Connection continued
Recv:15:21:32.526: Resend:22
Recv:15:21:32.529: Ignore due to resend: ok
Recv:15:21:32.529: Ignore due to resend: Resend:22
Recv:15:21:32.529: Ignore due to resend: ok
Recv:15:21:32.529: Ignore due to resend: Resend:22
Recv:15:21:32.529: Ignore due to resend: ok
Recv:15:21:32.529: Ignore due to resend: Res
Recv:15:21:32.529: Ignore due to resend: (_2
Recv:15:21:32.529: Ignore due to resend: ok
Recv:15:21:32.529: Ignore due to resend: Resend:22
Recv:15:21:32.529: Ignore due to resend: ok
Recv:15:21:32.533: Ignore due to resend: Error:Wrong checksum
Recv:15:21:32.540: Waiting for resend requests finished. Starting resends ...
Send:15:21:32.540: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:32.750: Resend:22
Recv:15:21:32.752: Ignore due to resend: ok
Recv:15:21:32.754: Ignore due to resend: Error:Wrong checksum
Recv:15:21:32.766: Waiting for resend requests finished. Starting resends ...
Send:15:21:32.766: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:32.976: Resend:22
Recv:15:21:32.978: Ignore due to resend: ok
Recv:15:21:32.979: Ignore due to resend: Error:Wrong checksum
Recv:15:21:32.991: Waiting for resend requests finished. Starting resends ...
Send:15:21:32.991: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:33.234: Resend:22
Recv:15:21:33.236: Ignore due to resend: ok
Recv:15:21:33.237: Ignore due to resend: Error:Wrong checksum
Recv:15:21:33.249: Waiting for resend requests finished. Starting resends ...
Send:15:21:33.250: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:33.459: Resend:22
Recv:15:21:33.461: Ignore due to resend: ok
Recv:15:21:33.463: Ignore due to resend: Error:Wrong checksum
Recv:15:21:33.475: Waiting for resend requests finished. Starting resends ...
Send:15:21:33.475: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:33.684: Resend:22
Recv:15:21:33.686: Ignore due to resend: ok
Recv:15:21:33.688: Ignore due to resend: Error:Wrong checksum
Recv:15:21:33.700: Waiting for resend requests finished. Starting resends ...
Send:15:21:33.700: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:33.909: Resend:22
Recv:15:21:33.912: Ignore due to resend: ok
Recv:15:21:33.913: Ignore due to resend: Error:Wrong checksum
Recv:15:21:33.925: Waiting for resend requests finished. Starting resends ...
Send:15:21:33.925: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:34.135: Resend:22
Recv:15:21:34.138: Ignore due to resend: ok
Recv:15:21:34.143: Ignore due to resend: Error:Wrong checksum
Recv:15:21:34.152: Waiting for resend requests finished. Starting resends ...
Send:15:21:34.152: Resend: N22 M531 Kabelhalter_Frässpi
Recv:15:21:34.360: Resend:22
Mesg:15:21:34.360: Receiving only error messages. Reset communication for printer Spark Cube V 1.1.
Recv:15:21:34.361: Connection verified by:ok
Mesg:15:21:34.361: Received extra ok - ignored
Recv:15:21:34.361: ok
Mesg:15:21:35.502: Dtr: true Rts: true
Mesg:15:21:35.502: Connection started
Mesg:15:21:35.502: Printer reset requested - emergency:false
Mesg:15:21:35.503: Dtr: false Rts: false
Mesg:15:21:35.523: Dtr: true Rts: true
Recv:15:21:35.532: Response while unconnected:Error:Wrong checksum
Recv:15:21:35.532: Error:Wrong checksum
Recv:15:21:35.864: Connection verified by:start
Recv:15:21:35.865: Printer reset detected:start
Recv:15:21:35.865: start
Recv:15:21:35.866: Info:PowerUp
Send:15:21:35.866: N0 M110 N0
Recv:15:21:35.867: Detected EEPROM version:20
Recv:15:21:38.521: Free RAM:80684
Recv:15:21:38.714: SD init fail
Recv:15:21:38.718: SD initialization failed.
Recv:15:21:38.718: Do not reformat the card!
Recv:15:21:38.722: Is the card correctly inserted?
Recv:15:21:38.726: Is chipSelect set to the correct value?
Recv:15:21:38.730: Does another SPI device need to be disabled?
Recv:15:21:38.730: Is there a wiring/soldering problem?
Recv:15:21:38.735: errorCode: 32
Recv:15:21:38.735: SelectExtruder:0
Recv:15:21:38.736: FlowMultiply:100
Recv:15:21:38.738: ok
Send:15:21:38.738: N1 M999 ; In case we did not reset recover from fatal state
Recv:15:21:38.825: ok 1
Send:15:21:38.825: N0 M110 N0
Recv:15:21:38.830: DebugLevel:6
Mesg:15:21:38.830: info:Continue from fatal state
Recv:15:21:38.832: ok
Recv:15:21:38.836: ok 1
Recv:15:21:38.842: ok 2
Send:15:21:38.842: N3 M115 ; Check firmware and capabilities
Recv:15:21:38.846: ok 3
Send:15:21:38.846: N4 M220 S100 ; set speed multiplier
Recv:15:21:38.862: FIRMWARE_NAME:Repetier_1.0.5 COMPILED:Oct 24 2023 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
Recv:15:21:38.866: Cap:PROGRESS:1
Recv:15:21:38.866: Cap:AUTOREPORT_TEMP:1
Recv:15:21:38.870: Cap:HOST_RESCUE:1
Recv:15:21:38.870: Cap:EEPROM:1
Recv:15:21:38.870: Cap:AUTOLEVEL:0
Recv:15:21:38.870: Cap:Z_PROBE:0
Recv:15:21:38.874: Cap:SOFTWARE_POWER:0
Recv:15:21:38.875: Cap:TOGGLE_LIGHTS:1
Recv:15:21:38.878: Cap:PAUSESTOP:1
Recv:15:21:38.878: Cap:PREHEAT:1
Recv:15:21:38.882: Cap:EMERGENCY_PARSER:1
Recv:15:21:38.886: Printed filament:2503.88m Printing time:28 days 7 hours 55 min
Recv:15:21:38.886: PrinterMode:FFF
Recv:15:21:38.886: ok 4
Send:15:21:38.886: N5 M221 S100 ; set flow multiplier
Recv:15:21:38.890: SpeedMultiply:100
Recv:15:21:38.890: ok 5
Send:15:21:38.890: N6 M355 ; get light status
Recv:15:21:38.894: FlowMultiply:100
Recv:15:21:38.894: ok 6
Send:15:21:38.894: N7 G92 E0 ; reset extruder position
Recv:15:21:38.899: Info:Case lights on
Recv:15:21:38.899: ok 7
Send:15:21:38.899: N8 G90 ; absolute coordinates
Recv:15:21:38.903: X_OFFSET:0.000 Y_OFFSET:0.000 Z_OFFSET:0.000
Recv:15:21:38.903: ok 8
Send:15:21:38.903: N9 M82 ; absolute E values
Recv:15:21:38.907: ok 9
Send:15:21:38.907: N10 G21 ; units are mm
Recv:15:21:38.911: ok 10
Send:15:21:38.911: N11 M114 ; check position
Recv:15:21:38.915: ok 11
Send:15:21:38.915: N12 M111 S6 ; debug flags
Recv:15:21:38.919: X:0.00 Y:0.00 Z:0.000 E:0.0000
Recv:15:21:38.919: ok 12
Send:15:21:38.919: N13 M360 ; get configuration
Recv:15:21:38.923: DebugLevel:6
Recv:15:21:38.923: ok 13
Send:15:21:38.923: N14 M539 S1
Exec:15:21:38.923: @getip
Recv:15:21:38.927: Config:Baudrate:115200
Recv:15:21:38.927: Config:InputBuffer:127
Recv:15:21:38.931: Config:NumExtruder:1
Recv:15:21:38.931: Config:MixingExtruder:0
Recv:15:21:38.935: Config:HeatedBed:1
Recv:15:21:38.935: Config:SDCard:1
Recv:15:21:38.935: Config:Fan:1
Recv:15:21:38.939: Config:Fan2:0
Recv:15:21:38.939: Config:LCD:1
Recv:15:21:38.944: Config:SoftwarePowerSwitch:0
Recv:15:21:38.944: Config:XHomeDir:1
Recv:15:21:38.945: Config:YHomeDir:1
Recv:15:21:38.948: Config:ZHomeDir:-1
Recv:15:21:38.949: Config:XHomePos:194.00
Recv:15:21:38.952: Config:YHomePos:199.00
Recv:15:21:38.953: Config:ZHomePos:0.000
Recv:15:21:38.957: Config:SupportG10G11:1
Recv:15:21:38.960: Config:SupportLocalFilamentchange:1
Recv:15:21:38.960: Config:CaseLights:1
Recv:15:21:38.960: Config:ZProbe:0
Recv:15:21:38.964: Config:Autolevel:0
Recv:15:21:38.964: Config:EEPROM:1
Recv:15:21:38.968: Config:PrintlineCache:32
Recv:15:21:38.968: Config:JerkXY:20.00
Recv:15:21:38.972: Config:KeepAliveInterval:2000
Recv:15:21:38.972: Config:JerkZ:0.30
Recv:15:21:38.976: Config:RetractionLength:1.00
Recv:15:21:38.977: Config:RetractionLongLength:13.00
Recv:15:21:38.980: Config:RetractionSpeed:40.00
Recv:15:21:38.984: Config:RetractionZLift:0.00
Recv:15:21:38.988: Config:RetractionUndoExtraLength:0.00
Recv:15:21:38.989: Config:RetractionUndoExtraLongLength:0.00
Recv:15:21:38.992: Config:RetractionUndoSpeed:20.00
Recv:15:21:38.996: Config:XMin:0.00
Recv:15:21:38.996: Config:YMin:0.00
Recv:15:21:38.997: Config:ZMin:0.00
Recv:15:21:39.002: Config:XMax:194.00
Recv:15:21:39.002: Config:YMax:199.00
Recv:15:21:39.006: Config:ZMax:152.00
Recv:15:21:39.006: Config:XSize:194.00
Recv:15:21:39.006: Config:YSize:199.00
Recv:15:21:39.010: Config:ZSize:152.00
Recv:15:21:39.010: Config:XPrintAccel:4000.00
Recv:15:21:39.014: Config:YPrintAccel:4000.00
Recv:15:21:39.018: Config:ZPrintAccel:80.00
Recv:15:21:39.018: Config:XTravelAccel:4000.00
Recv:15:21:39.022: Config:YTravelAccel:4000.00
Recv:15:21:39.022: Config:ZTravelAccel:80.00
Recv:15:21:39.026: Config:PrinterType:Cartesian
Recv:15:21:39.026: Config:MaxBedTemp:110
Recv:15:21:39.030: Config:Extr.1:Jerk:20.00
Recv:15:21:39.034: Config:Extr.1:MaxSpeed:50.00
Recv:15:21:39.035: Config:Extr.1:Acceleration:5000.00
Recv:15:21:39.038: Config:Extr.1:Diameter:0.00
Recv:15:21:39.042: Config:Extr.1:MaxTemp:285
Recv:15:21:39.042: ok 14
Send:15:21:39.042: N15 M114
Exec:15:21:39.042: @startCodeProcessed
Send:15:21:39.042: N16 M155 S1
Send:15:21:39.042: N17 M415
Recv:15:21:39.045: ok 15
Recv:15:21:39.050: X:0.00 Y:0.00 Z:0.000 E:0.0000
Recv:15:21:39.050: ok 16
Recv:15:21:39.050: ok 17
Recv:15:21:39.050: RESCUE_STATE: OFF
Send:15:21:39.050: N18 M117 192.168.0.111:3344
Recv:15:21:39.057: ok 18
Recv:15:21:43.060: wait (4)
Send:15:21:43.624: N19 M117 Finished
Recv:15:21:43.658: ok 19
Recv:15:21:49.700: wait (6)
Exec:15:21:50.525: @getip
Send:15:21:50.526: N20 M117 192.168.0.111:3344
Recv:15:21:50.531: ok 20
Recv:15:22:14.555: wait (24)
