Push Messages not being sent

malcinator

My SD Card failed and so I have re-installed the latest version and reconfigured the server. I have been trying to set back up my Push Messages with no luck. I have tried Repeater-Informer, which was working as expected before the SD Card failure.

My Group Key is : DPZL8-489P8-378RS-UWU94-G8772 and I see the message in the server.log

2023-09-10 16:25:28: Repetier-Informer API response: {"error":1008,"errorMessage":"No one listening for group"}

As this was not working I then turned to Pushover. I have a working API (I don't want to paste the API Token/Key and my user key) and can test it via a bash script which delivers the message. How ever sending from Repetier-Server the log returns.

2023-09-10 16:32:20: Push Over API response: {"token":"invalid","errors":["application token is invalid, see https://pushover.net/api"],"status":0,"request":"282536df-f54b-4fbc-be99-7df86a6bc8fd"}

I haven't had this problem before, everything work out out of the gate.

malcinator

Just a quick update. I have a lot to get through printing wise so I have re-installed V1.4.10 and the push messages are working again. Only using pushover though as I can attach an image to the message.

Repetier

Regarding server, it is working. But there is no group with your id so nothing to send to. If you see it on your phone, delete it and create a new one.

Pushover is a bit strange. First tets said
5:08:32.362: Push Over API response: {"info":"no active devices to send to","status":1,"request":"2a0455ca-e23e-4c3e-8990-882143d0da69"}and later messages where I wanted to debug worked
15:57:12.098: Push Over API response: {"status":1,"request":"c946129f-fe4f-4c66-8f2b-c1dad1796996"}15:57:34.012: Push Over API response: {"status":1,"request":"1fe9a75c-6cd7-41cb-b8a1-71c7e5e4010b"}15:57:57.698: Push Over API response: {"status":1,"request":"86e367f0-be90-4814-ae67-b1b0ae7f879e"}From your message it seems like it did not know your token or it was wrong when you tested. Since we also did not touch that function I assume it still works in general just that it had bad token value for the test.

malcinator

Yes, I tried recreating the API keey using the link provide in the Push Messages. I spent a good couple of hours trouble shooting both Pushover & Informer. I was able to send messages to Pushover via a bash script and recived that message on my iphone. I could not no matter how many times I started over with API keys or Informer Groups.

Reinstalling 1.4.10 work as expected using the same API Key & Informer Group I was trying to use with 1.4.12.

DPZL8-489P8-378RS-UWU94-G8772

2023-09-12 07:35:40: Repetier-Informer API response: {"error":0,"data":{"receivers":1}}

2023-09-12 07:36:35: Push Over API response: {"status":1,"request":"187c66bb-f698-438d-b446-52a305a4f09b"}

Very strange.

I will upgrade to 1.4.13 when its released as for now I can't afford for my server to be off-line for the next few days.