I had a timeout it seems on Repetier Server and when it continued it didnt resume properly:
Mesg:7:19:20.928: Connection closed by os during print ... trying reconnect for 10 seconds to continue ...
Mesg:7:19:28.256: Dtr: true Rts: true
Mesg:7:19:28.257: Connection continued
Send:7:19:28.268: M117 Layer 819/1029
Send:7:19:28.268: N649952 G1 X130.718 Y163.196 E16.14235
Recv:7:19:30.301: echo:V88 stored settings retrieved (656 bytes; crc 25792)
Recv:7:19:30.304: Unified Bed Leveling System v1.01 active
Recv:7:19:30.361: Mesh loaded from slot 0
Recv:7:19:30.363: Mesh 0 loaded from storage.
Mesg:7:19:32.270: Warning: Communication timeout - resetting communication buffer.
Mesg:7:19:32.270: Connection status: Buffered:63, Manual Commands: 0, Job Commands: 5000
Mesg:7:19:32.270: Buffer used:63 Enforced free byte:41 lines stored:2
Send:7:19:32.270: N649953 G1 X128.7 Y165.214 E16.23895
Send:7:19:32.271: N649954 G1 X126.682 Y163.196 E16.33555
Recv:7:19:35.394: Testing X connection... OK
Recv:7:19:35.406: Testing Y connection... OK
Recv:7:19:35.417: Testing Z connection... OK
Recv:7:19:35.428: Testing Z2 connection... OK
Recv:7:19:35.439: Testing E connection... OK
Recv:7:19:36.001: echo:SD card ok
Recv:7:19:36.067: Error:Line Number is not Last Line Number+1, Last Line: 0
Recv:7:19:36.067: Resend: 1
Recv:7:19:36.070: Ignore due to resend: ok
Recv:7:19:36.074: Ignore due to resend: ok
Recv:7:19:36.086: Waiting for resend requests finished. Starting resends ...
As you can see from the logs it isnt setting the temperature:
Send:7:19:45.533: N88 G1 X135.865 Y162.935 E24.33777
Recv:7:19:45.600: T:204.46 /0.00 B:53.86 /0.00 @:0 B@:0
As such after a while it fails due to:
Recv:7:20:38.246: echo: cold extrusion prevented
I assume my pi restarted or the server restarted but tbh idve rather it abandon the job than continue and waste filament and not tell me so that I can fix it.
